Cut out failed foam, restore your roof, clear your mortgage

Roof spray foam removal in London done right

Roof spray foam removal in London is the job we do every week: cutting out failed open cell and closed cell foam from lofts and rafters, then restoring the ventilation your roof needs. We work across Greater London for homeowners, buyers and landlords who have been told the foam has to go before a sale, a remortgage or a survey can proceed. Same-day quotes, tidy work, waste taken away.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Experienced Spray foam removal professionals at work
Careful work. Honest options.
About this service

What roof spray foam removal in London involves

Roof spray foam removal in London means physically cutting, scraping and vacuuming out the polyurethane foam sprayed onto the underside of your roof covering or between rafters, then reinstating airflow so the roof can dry. Foam that was applied to trap heat often blocks the gap at the eaves, so we open that path back up, treat any timber that has started to rot, and leave the loft ready for a breathable insulation system such as mineral wool or a modern board. Nothing is left bagged up in your loft.

Most London customers come to us after a surveyor flags spray foam during a mortgage valuation, or after they notice condensation dripping onto stored boxes. Roof insulation removal London wide is rarely cosmetic: closed cell foam traps moisture against felt and battens, and hidden damp and rot follow within a few seasons. If you have been searching for roof insulation removal near me London and been quoted silly money, we will tell you honestly what your roof needs and what it does not.

  • ✓ Mortgage and sale cleared
  • ✓ Ventilation restored
  • ✓ Rot stopped early
  • ✓ Insulation that performs
What's included

What our roof spray foam removal includes

Every removal job is quoted as a complete package so you know exactly what you are paying for. The items below are standard on all our London roof spray foam removal work. Anything outside this list, such as full roof replacement or new felt, is quoted separately after the survey.

✓

Free loft survey

A site visit with thermal imaging camera and moisture meter to map the foam, check the timbers and confirm the eaves ventilation gap. You get a fixed written price the same day.

✓

Dust-controlled removal

Protective sheeting, a negative air machine and an air scrubber with HEPA filters keep foam dust out of your living space while we cut and vacuum the foam out.

✓

Timber inspection and treatment

Every rafter and batten is checked for rot and fungal growth once the foam is off. We treat what can be saved and replace what cannot, with photos of each stage.

✓

Ventilation reinstated

We clear the eaves gap and any blocked vents so the roof can dry. This is the step that stops condensation coming back and keeps the roof compliant with Building Regulations Part L.

✓

Waste removal and paperwork

All foam is bagged, removed from site the same day and disposed of through licensed routes. You receive a waste transfer note and a dated photo record for your lender or surveyor.

How it works

How our removal process works

01

Survey and quote

We visit, photograph the foam, check the eaves gap and take moisture readings on the timbers. You get a fixed written price the same day, usually within two hours of the visit. No charge for the survey, no pressure to book.

02

Protection and setup

On the day, we sheet the loft floor, stairs and landing with protective sheeting, seal the hatch with a negative air machine and run an air scrubber with HEPA filters. That keeps foam dust out of your living space. Setup takes about 45 minutes.

03

Foam removal

We cut the bulk of the foam with a reciprocating saw and oscillating multi-tool, then finish the bonded residue with a dry ice blasting machine or sand blasting equipment where the substrate allows. Operators wear a respirator and protective clothing throughout. A typical three-bed loft takes one to two days.

04

Timber check and treatment

With the foam gone we inspect every rafter and batten, treat any fungal growth, and replace timber that has lost its strength. We photograph each stage so you have a dated record for your lender or surveyor.

05

Clearance and handover

All foam goes into disposal bags and leaves site the same day. We vacuum the loft, reinstate the ventilation path, and walk you through what we found and what we fitted. You get the photo record and waste transfer note by email.

Tools & methods

Tools and methods we use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Reciprocating saw and oscillating multi-tool

Used to cut the bulk of the foam away from rafters and battens without damaging the timber underneath. The multi-tool gets into the tight corners around purlins and eaves.

Dry ice blasting machine

Dry ice pellets lift bonded foam and adhesive residue off older timbers without soaking them or abrading the surface. Our preferred finish where the roof structure is fragile.

Sand blasting equipment

For stubborn foam on brick, block and concrete roof decks, sand blasting media strips the residue back to a clean surface ready for a new insulation build.

Thermal imaging camera

Maps moisture and cold spots in the roof before and after removal, so we can prove the timber has dried and the ventilation is working again.

Industrial vacuum, air scrubber and negative air machine

Run together with HEPA filters to capture foam dust at source and keep it out of your living space. The negative air machine holds the loft under slight pressure all day.

Respirator and protective clothing

Standard kit for every operator. Spray foam dust and old isocyanate residue are not things you want to breathe, so the crew is fully covered from setup to clearance.

Real results

Before and after.

Wandsworth terrace mortgage rescue

Before

A three-bed Victorian terrace had closed cell foam sprayed across the rafters in 2014. The buyer's lender refused the mortgage and the sale stalled. Moisture readings showed 24% in two battens, and the eaves gap was completely blocked.

After

We removed the foam over two days, treated the damp battens, cleared the 25mm eaves gap and issued the photo record and waste transfer note. The lender reinstated the valuation and the sale completed three weeks later.

Hackney rental loft dried out

Before

A landlord's tenants had reported condensation dripping onto stored boxes for two winters. The foam was open cell but applied thickly across the eaves, and one batten had started to soften. The loft smelled damp.

After

We removed the foam in a day and a half, replaced the rotten batten, and restored ventilation. Moisture readings dropped below 16% within three weeks and the tenants stopped reporting damp.

Bromley remortgage with re-insulation

Before

A 1930s semi in Bromley had thick closed cell foam that a surveyor flagged as a defect. The homeowner was remortgaging and needed it gone, but also wanted the loft to perform better than the old foam had.

After

We removed the foam over two days, treated the timbers, and fitted breathable insulation to current standards. The remortgage completed and the loft now meets the U-value the lender's surveyor expected.

Problems we solve

Problems our London removal service solves

Spray foam that was sold as a money-saver often becomes the reason a sale stalls or a loft stays damp. These are the problems we are called out to fix across London every week.

Ask a pro →
01

Mortgage rejected because of spray foam

We remove the foam, document the work with dated photos and moisture readings, and issue a method statement your lender or the buyer's surveyor can accept. Most sales we unblock complete within a month of the removal.

↗
02

Condensation dripping in the loft

We cut the foam back, restore the 25mm ventilation path at the eaves, and check the timbers for moisture with a thermal imaging camera. Damp patches usually dry out within a few weeks of the roof breathing again.

↗
03

Hidden damp and rot in the rafters

Our survey includes moisture readings at multiple points, and we cut out and treat any soft timber during removal. Catching rot at the first sign costs far less than replacing a roof section later.

↗
04

Difficulty obtaining surveys

Removing the foam gives surveyors the clear view they need. We provide the photo record and waste transfer note that turns an unvaluable roof into a straightforward one, usually within two working days on site.

↗
Proof you can check

Accredited and reviewed

✓
CHAS AccreditationCHAS
✓
Constructionline RegistrationConstructionline
✓
SafeContractor ApprovalSafeContractor
✓
TrustMark RegistrationTrustMark
✓
BPCA MembershipBritish Pest Control Association
Good questions

Frequently Asked Questions

02080885342 →

Most London lofts cost between 1,800 and 4,500 pounds in 2026, with a typical three-bed terrace landing around 2,400 to 3,200 pounds. Price depends on foam type, thickness, loft size and access. Closed cell foam bonded hard to felt sits at the top of the range; thin open cell foam on a simple roof sits at the bottom. The survey and written quote are free.

Yes. We remove open cell and closed cell spray foam from lofts, rafters and roof decks across every London borough, using saws, oscillating multi-tools and dry ice blasting for the bonded residue. If the foam is sound and your lender accepts it, we will tell you so rather than sell you a removal you do not need.

Sometimes. Buildings insurance occasionally covers removal where the foam caused water damage or rot, but most policies exclude it because spray foam was a deliberate installation. We provide a full photo record and written report you can submit with a claim. If the claim is refused, we can usually phase the work to spread the cost.

A standard three-bedroom loft takes one to two working days, including setup, removal, timber treatment and clearance. Larger lofts, thick closed cell foam or restricted access can run to three days. We give you a realistic timeframe at quote stage and keep to it, because most customers are living in the property while we work.

Ready when you are

Book roof spray foam removal in London today

Free survey, fixed written price, and a photo record your lender will accept. We are CHAS accredited and TrustMark registered, and we answer the phone 24/7. Call now and we will book your survey, often for the same day.

Get a free quote 02080885342 →
Request an appointment

Book your spray foam removal

Call 02080885342 between 8am and 6pm Monday to Friday, or leave a message any time and we will call you back the next morning. Most surveys are booked within 48 hours and quotes go out the same day. Email works too if you have photos of the loft to send over.

Request received — our team will be in touch shortly.
Tap to call02080885342